|
|
|
|
|
 Energy Series
High Performance Power Amplifiers
Technical Specifications
Energy
2: [Power Specifications | Electrical Specifications | General
Specifications]
Energy 3: [Power Specifications | Electrical
Specifications | General Specifications]
IHF dynamic power
Tone burst 10% / 20 ms
Max THD 0.1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
900 W
1000 W
700 W
1800 W
2000 W
1400 W |
FTC output power
20Hz-20kHz
Max THD 0.1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
750 W
850 W
550 W
1500 W
1600 W
1000 W |
EIA output power
1kHz
Max THD 1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
650 W (750 W single
channel)
800 W (900 W single channel)
500 W (600 W single channel)
1300 W
1600 W
1000 W |
| Inputs |
Sensitivity
impedance |
0 dB (0.775 V) o +6.5 dB
(1.65 V)
30 kohms (balanced) - 15 kohms (unbalanced) |
| Frequecy response |
|
20÷20000 Hz (-0.5dB) |
| Phase response |
|
±10° @ 20 Hz / ±20° @
20 kHz |
| Voltage gain |
|
38 db (±0.5) or 32 dB
(±0.5) |
| Slew rate |
|
>=23 V/µs |
| Damping factor |
|
> 400:1 (@ 1 kHz / 8
ohms) |
| Cmrr |
|
>=90 dB (@ 1 kHz) |
| Crosstalk |
|
>=90 dB (@ 1 kHz) |
| Hum & noise |
|
>=100 dB |
| Total harmonic distortion |
(THD+N) |
<= 0.020% @1 kHz /
<= 0.030% 20÷20000 Hz |
| Inter-modulation
distortion |
(IMD) |
<= 0.020% (SMPTE
method, 60 Hz & 7 kHz, 4:1 ratio) |
| Protections |
Power supply
Amplifier
Speakers |
Power transformer thermal
protection
Heat sink thermal protection Short circuit protection
Power transistor SOA processor
Delayed turn-on Sensor for current on outputs
ANTI-CLIPPING |
| Controls |
Front panel
Back panel |
ON/OFF switch
Signel level control for each channel
STEREO/BRIDGE/PARALLEL selector
Input sensitivity selector
Minimum impedance selector Earth lift |
| Indicators |
|
STEREO/BRIDGE/PARALLEL: 3
yellow LEDs
SIGNAL/CLIP: 1 green/red LED for each channel
PROTECT: 1 red LED for each channel |
| Connectors |
Input
Output
Sequence link |
1 XLR-F + 1 JACK in
parallel for each channel
1 SPEAKON 4-way for each channel
2 binding-post for each channel
2 DIN 5-way for SEND & RECEIVE |
| Power supply |
|
See label on the
apparatus |
| Dimensions |
(LxHxD) |
483x88x507 mm - 2 rack
units |
| Weight |
|
23 kg / 50.6 lbs. |
IHF dynamic power
Tone burst 10% / 20 ms
Max THD 0.1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
1500 W
1500 W
900 W
3000 W
3000 W
1750 W |
FTC output power
20Hz-20kHz
Max THD 0.1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
1100 W
1200 W
750 W
2200 W
2500 W
1500 W |
EIA output power
1kHz
Max THD 1%
Both channels driven.
|
2 ohms
4 ohms
8 ohms
4 ohms bridged
8 ohms bridged
16 ohms bridged |
1100 W (1200 W single
channel)
1250 W (1400 W single channel)
750 W (900 W single channel)
2200 W
2500 W
1500 W |
| Inputs |
Sensitivity
impedance |
0 dB (0.775 V) or +8 dB
(1.95 V)
30 kohms (balanced) - 15 kohms (unbalanced) |
| Frequecy response |
|
20÷20000 Hz (-0.5dB) |
| Phase response |
|
±15° @ 20 Hz / ±25° @
20 kHz |
| Voltage gain |
|
39 db (±0.5) or 32 dB
(±0.5) |
| Slew rate |
|
>=27 V/µs |
| Damping factor |
|
> 600:1 (@ 1 kHz / 8
ohms) |
| Cmrr |
|
>=90 dB (@ 1 kHz) |
| Crosstalk |
|
>=100 dB (@ 1 kHz) |
| Hum & noise |
|
>=100 dB |
| Total harmonic distortion
|
(THD+N) |
<= 0.020% @1 kHz /
<= 0.030% 20÷20000 Hz |
| Inter-modulation
distortion |
(IMD) |
<= 0.020% (SMPTE
method, 60 Hz & 7 kHz, 4:1 ratio) |
| Protections |
Power supply
Amplifier
Speakers |
Power transformer thermal
protection
Heat sink thermal protection Short circuit protection
Power transistor SOA processor
Delayed turn-on Sensor for current on outputs
ANTI-CLIPPING |
| Controls |
Front panel
Back panel |
ON/OFF switch
Signal level control for each channel
STEREO/BRIDGE/PARALLEL selector
Input sensitivity selector
Minimum impedance selector Earth lift |
| Indicators |
|
STEREO/BRIDGE/PARALLEL: 3
yellow LEDs
SIGNAL/CLIP: 1 green/red LED for each channel
PROTECT: 1 red LED for each channel |
| Connectors |
Input
Output
Sequence link |
1 XLR-F + 1 JACK in
parallel for each channel
1 SPEAKON 4-way for each channel 1 SPEAKON 4-way for
BRIDGE output
2 binding-post for each channel
2 DIN 5-way for SEND & RECEIVE |
| Power supply |
|
See label on the
apparatus |
| Dimensions |
(LxHxD) |
483x132.5x507 mm - 3 rack
units |
| Weight |
|
34.5 kg / 76 lbs. |
Generalmusic reserves the right to change
specifications without notice.
Copyright © 1997
Generalmusic S.p.A.
[Vermietung]
[Verkauf]
[Occasionen]
[Download]
[So finden Sie uns]
[Kontakt-Formular]
Copyright 1997-2024 by Rony Meyer,
www.crazyevents.ch
, webmaster@crazyevents.ch
|
